Reveal your source.

Digital Inputs XLR: AES/EBU 24 bit Single Wire, BNC: SPDIF, RCA: SPDIF, Optical: Toslink 44.1- 96k, USB 2
Sample Rates AES, SPDIF, AUX in 44.1 kHz, to, 192khz
Sample Rates USB 44.1 kHz, to, 384kHz, DSD 64fs 128Fs as DoP
Sample Rates Ethernet 44.1 kHz, to, 192kHz, DSD 64fs as DoP
Jitter 8 psec @ 48k / 6psec @ 96k
Balanced Analog Outputs XLR balanced (pin 2 hot)
Impedance 40 ohm
Output @ full scale +16.5 dbm (5.2V RMS)
Output Level 90db in 1 db steps
D/A Conversion PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit
Frequency Response @44.1k 10 hz- 20 kHz +0dB, -.2 dB
Dynamic Range >120dB A-Weighted
THD+N @ 1k .0008% @ 0dbfs / .0004% @-30dbfs
Unbalanced Analog Outputs RCA
Impedance 40 ohm
Output level Full scale at front panel +6 dbm (1.2V RMS)
D/A Conversion 24 bit delta sigma 8x oversampling
Frequency Response @ 44.1k 10 hz- 20 kHz -.2 dB
Dynamic Range >120dB A-Weighted
THD+N @ 1k .0008% @ 0dbfs / .0004% @-30dbfs
General Specifications EMC: Complies with: EN 55103-1, EN 55103-2, FCC part 15 and Class B
RoHS Complies with: EU RoHS Directive 2002/95/EC
Safety Certified to: IEC 60065, EN 55103-2
Operating Temperature 32 F to 105 F (0 C to 40 C)
Storage Temperature: -22 f to 167 F (-30 C to 70 C)
Finish Anodized Aluminum
Dimensions 17” x 12“ x 4.5”
Weight 15 lbs
Shipping Weight 18 lbs
Shipping Dimensions 22”x 17”x 7”
Mains Voltage -100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
Trigger out TRS connector for 5V external trigger.
Power consumption: 28 Watts (6W standby)
Warranty parts and labor 2 yrs non-transferable.